Car-Chem Heavy Cut Compound is the first of 3 stages of cutting compounds. Developed in house by our technical department, our Heavy Cut Compound is formulated with high cutting abrasives and fillers. It also contains kaolin clays to help refine, restore and cleanse your vehicle’s paintwork. Car-Chem Heavy Cut Compound is designed as an aggressive stage of polishing. It will remove scratches of 1200 grit sandpaper and swirl marks with ease, preparing for our Medium Cut Compound. PRODUCT CODE: CC310 FRAGRANCE: NONE COLOUR: RED How To Use (Hand Application): Apply 2-5 pea sized amounts of compound to a clean, lint free microfibre or a foam applicator pad. Using light pressure; spread the compound onto the vehicles paintwork, working in small areas (50cm x 50cm) using an up/down and left/right lattice pattern for optimal coverage. Allow the compound to dry to a haze. Buff off with a clean, lint free microfibre. How To Use (Machine Application): Apply 2-5 pea sized amounts of compound to a light foam polishing pad. Using light pressure and the lowest speed setting; spread the compound onto the vehicles paintwork. Work in small areas (50cm x 50cm) using an overlapping up/down and left/right lattice pattern for optimal coverage. Increase the speed setting to a maximum of 1000RPM and continue to work the compound into the paintwork until the polish becomes clear. Allow the compound to dry to a haze. Buff off with a clean, lint free microfibre. Top Tip: Ensure you are working out of direct sunlight whenever you are using a polishing compound, and check that your vehicle is cool to the touch prior to application. For best results use our Prep Panel Wipe between each stage of cutting to remove any unwanted contaminants.
